SF-50 Double-Component Silicone Structural Sealant

详细说明

Product Features：

Double component high modulus structural silicone sealant.

Excellent weather ability to resist high or low temperatures, ozone & ultraviolet (UV) rays.

Good adhesion and elasticity to most building materials.

Application Area：

1. Structural adhesion and seal for large scale and super high glass curtain walls.

2. Specially suited for structural adhesion and seal for the elementary glass and metal component of the workshop assembly curtain walls, as well as structural adhesion and seal of double glass.

Using Instructions：

1. Keep adhesion surface clean, dry to ensure good adhesion.

2. Paste masking tape on joint sides as protection, trim and remove adhesion before curing.

3. Mix the part A and part B thoroughly in the ratio of 10: 1 while using, however users can change mixing ratio and adjust curing speed according to reality.

4. Users must do local tests on the adaptability and compatibility to ensure good adhesion between products and panels.

5.Our company is not responsible for any accidental loss.

Precautions：

1. Not suitable for materials with greasy surface.

2. Not suitable for frosted or wet surfaces.

3. Not suitable for continuous immersion and wet places.

4. B Component should not be exposed under air for a lone time.

Safety Instruction：

1. Use in well ventilated areas.

2. In case of eye contact, flush with water and seek medical attention immediately.

3. Keep out of the reach of children; avoid long time touch with skin.

4. No touch with food, medicine and cosmetics.