SF-52 ACETIC SILICONE STRUCTURAL SEALANT

详细说明

Product Features：

Single component, acetic, high tensile structural silicone sealant.

Excellent weather ability to resist temperature, ozone & ultraviolet (UV) rays.

Good adhesion to most building materilas.

Application Area：

1. Structural adhesion and seal for the glass doors and windows.

2. Structural adhesion and seal for glass installation project and indoor glass decoration.

3. Structural and jointing seal for glass curtain wall.

4. Application of big glass panel, day light dome, technical glass structural, Project.

SF-52 Acetic Silicone Structural Sealant
Specifications		Value
Composition		Acetic Curing
Density	g/cm³	1.04±0.01
Skin Formation time at 23°C / 50% RH	Minutes	12
Curing Rate	mm/24 hours	3.5
Hardness (Shore A)		38
Tensile Strength	MPa	0.75
Ultimate Elongation		310
Modulus at 100% Elongation	MPa	0.48
Sag	mm	0
Application Temperature	°C	+4 to +40
Temperature Resistance	°C	-40 to +180
Volatile Organic Content (VOC)	%	3.1
Elastic recovery	%	95
Ultraviolet resistance		Yes
Can be painted over		No
Anti-Fungus & Anti-Bacterial		No

Using Instructions：

1. Clean the surface that needs adhesion with acetone or other solvents.

2. Paste masking tape on the joint sides; Remove the masking tape before the sealant full curing.

3. Product applicability should be confirmed in user's sole judgment. Please do the compatibility test before official use to make sure that it can stick well with the substrate materials and full the interface, otherwise we are not responsible for any complaints of application.

4. Clean up uncured sealant with cloth or solvent such (as turpentine) remove excessive solidified sealant with sharp knife.

Safety Instruction：

1. Use in well ventilated areas.

2. In case of eye contact, flush with water and seek medical attention immediately.

3. Keep out of the reach of children.

Storage：

Should be stored separately in cool and dry places, temperature below 27℃.

12 months shelf life from the date of production.

Transport：

Transported as unhazardous products.

Standards：GB/T 16776-2005, EN 15434:2006+A1:2010

Color：White, Grey, Black or Customize