SF-80 Double-Component Silicone Sealant for the Insulating Glass
详细说明
Using Instructions：
1. Keep adhesion surface clean, dry to ensure good adhesion.
2. Mix the part A and part B thoroughly in the ratio of 10: 1 while using, however users can change mixing ratio and adjust curing speed according to reality.
3.Users must do local tests on the adaptability and compatibility to ensure good adhesion between products and panels.
4.Our company is not responsible for any accidental loss.
Precautions：
1. Not used as structural sealant.
2. Not suitable for materials with greasy surface.
3. Not suitable for frosted or wet surfaces.
4. Not suitable for continuous immersion and wet places.
5. B component should not be exposed under air for a long time.
Safety Instruction：
1. Use in well ventilated areas.
2. In case of eye contact, flush with water and seek medical attention immediately.
3. Keep out of the reach of children; avoid long time touch with skin.
4. Should not get in touch with food, medicine and cosmetics.
Storage：
Should be stored separately in cool and dry places, temperature below 27℃.
12 months shelf life from the date of production.
Transport：
Transported as unhazardous products.
Standards：GB/T 29755-2017, EN 15434:2006+A1:2010
Color：Component A is White
Component B is Black
Packing：
Component A：190L
Component B：19L
previous item: SF-86 Neutral Curtain Wall Silicone Sealant *SENIOR*
next item: SF-52 Acetic Silicone Structural Sealant
关闭返回