SF-88 Neutral Weather-proof Silicone Sealant *PROFESSIONAL*

SF-88 is single component. Interior and exterior sealing application due to its UV, Ozone and ageing resistance characteristics. It cures at room temperature in the presence of atmospheric moisture, forming a weather proof flexible sealant body therefore curing time could vary due to environmental conditions. Non-sagging, low odor and neutral curing sealant with outstanding primeless adhesion on a variety of materials, low VOC level and shrinkage volume, can be applicate up to 40°C, flexible between -20°C up to 120°C.

1. Clean the surface that needs adhesion with acetone or other solvents.

2. Paste low viscosity adhesion on joint outer as protection, trim and remove the adhesion before curing.

3. Users must do local tests on the compatible adhesion; ensure good adhesion between products and panels. 

4.Our company is not responsible for any accidental loss.

1. Use in well ventilated areas.

2. In case of eye contact, flush with water and seek medical attention immediately.

3. Keep out of the reach of children.