SF-89 Neutral Silicone Sealant Specialized for MIRROR
详细说明
Using Instructions：
1. Clean the surface that needs adhesion with acetone or other solvents.
2. Paste low viscosity adhesion on joint outer as protection, trim and remove the adhesion before curing.
3. Clean up uncured sealant with cloth or solvent such (as turpentine) remove excessive solidified sealant with sharp knife.
Precautions：
1. No used as structural sealant.
2. Not suitable under airless circumstance before total curing.
3. Not suitable for surface that bleed grease, plasticizer and other organic liquid.
4. Not suitable for some rubber elastomers (EPDM, neoprene).
Safety Instruction：
1. Use in well ventilated areas.
2. In case of eye contact, flush with water and seek medical attention immediately.
3. Keep out of the reach of children.
Storage：
Should be stored separately in cool and dry places, temperature below 27℃.
12 months shelf life from the date of production.
Transport：
Transported as unhazardous products.
Standards：GB/T 14683-2017, GB/T 13477.10-2017, EN 15434:2006+A1:2010
Color：Semi-transparent or Customize
Packing:
Capacity： 280ml, 300ml, 600ml or Customize.
Outer Packing Size：29X20X24CM, 29X20X24CM, 37X20X24CM
关闭返回