SF-61 MS Sealant

详细说明

Product Features：

Single component modified silicone, low modulus, highly flexible adhesive cure by atmospheric moisture, high bonding strength, highly flexible, over-paintable, excellent environmental resistance, low VOC, no odor, no formaldehyde and environmental friendly.

Application Area：

MS polymer sealant can be bond metal: steel, aluminum, zinc and other metal alloys, composite’s such as GRP, FRP and carbon fiber, glass, wood, gyprock (plasterboard), plywood, MDF, plastics, marble stone, cement, brick and most building materials.

Using Instructions：

1. Clean the joint surface properly before applying the MS polymer.

2. Paste masking tape on the joint sides; remove the masking tape before the sealant full curing.

3. In order not to affect the bonding performance the cement and concrete substrates must be fully dried and cured for 7 days, then can be operate.

4. Before using this product, the user should conduct the compatibility test and adhesion test with the contact material.

5. It should not be used on all surfaces that are exposed to grease, plasticizers or solvents.

Precautions：

Do not use for structural assembly.

Safety Instruction：

1. Use in well ventilated areas.

2. In case of eye contact, flush with water and seek medical attention immediately.

3. Keep out of the reach of children.

Storage：

Should be stored separately in cool and dry places, temperature below 27℃.

12 months shelf life from the date of production.

Transport：

Transported as unhazardous products.

Standards：GB/T 14683-2017, EN 15434:2006+A1:2010

Color：White, Grey, Black or Customize

Packing:
Capacity： 280ml, 300ml, 600ml or Customize.

Packing Qty： 24PCS/CTN, 24PCS/CTN, 20PCS/CTN
Outer Packing Size：29X20X24CM, 29X20X24CM, 37X20X24CM

previous item: SF-28 Acetate Silicone Sealant next item: SF-68 Neutral Silicone Sealant For External Wall Panels

Products Sort

Contact Us

Products Details

SF-61 MS Sealant