SF-28 ACETATE SILICONE SEALANT
详细说明
| SF - 28 ACETATE SILICONE SEALANT | ||
| Specifications | Value | |
| Composition | Acetic Curing | |
| Density | g/cm³ | 0.98±0.01 |
| Skin Formation time at 23°C / 50% RH | Minutes | 15 |
| Curing Rate | mm/24 hours | 1.9 |
| Hardness (Shore A) | 32 | |
| Tensile Strength | MPa | 0.65 |
| Ultimate Elongation | % | 210 |
| Modulus at 100% Elongation | MPa | 0.4 |
| Sag | mm | 0 |
| Volatile Organic Content (VOC) | % | 6 |
| Elastic recovery | % | 88 |
| Ultraviolet resistance | Yes | |
| Can be painted over | No | |
| Anti-Fungus & Anti-Bacterial | No | |
Using Instructions：
1. Clean the surface where you will stick with acetone or other solvent.
2. Paste masking tape on the place that needs protection; Remove the masking tape before the sealant starts curing.
3. Product applicability should be confirmed in user's sole judgment. Please do the compatibility test before official use to make sure that it can stick well with the surface.
4. Clean up uncured sealant with cloth or solvent such as turpentine; remove excessive solidified sealant with sharp knife.
Safety Instruction：
1. Use in well ventilated areas.
2. In case of eye contact, flush with water and seek medical attention immediately.
3. Keep out of the reach of children.
Storage：
Should be stored separately in cool and dry places, temperature below 27℃.
12 months shelf life from the date of production.
Transport：
Transported as unhazardous products.
Standards：GB/T 16776-2005, EN 15434:2006+A1:2010
Color：White, Grey, Black or Customize
Packing:
Capacity： 280ml, 300ml, 600ml or Customize.
Outer Packing Size：29X20X24CM, 29X20X24CM, 37X20X24CM
previous item: SF-26 ACETATE SILICONE SEALANT-ANTI FUNGUS
next item: SF-61 MS SEALANT
关闭返回