SF-65 Nail Free Adhesive

详细说明

Product Features：

Water based one component multipurpose building adhesive with endurable and high adhesion performance, easy operation on most building materials, it can replace the nails and screws and use on the project where nails and screws cannot work.

Application Area：

Nail free adhesive has strong performance on most of the building materials, bond and gap-sealing for wood, wooden floor, stone, plasterboard, gypsum boards, tiles, ceramics, concrete panel, metal, plastic and rubbers. Can be painted over with any color or paint type after drying. Good flexibility.

Notice：

Keep the substrate surface clean, dry and free of oil and dust.

1. Dry-type Adhesion (apply for light materials and where the joint bear light pression): extrude several zigzag adhesive line by 40cm interval, press the side with adhesive onto the joint, and draw back slightly let it volatilize for 10- 30mins, then press the two sides tightly. (extend the time of volatilization in low temperature or damp surrounding).

2. Wet-type Adhesion (apply for where the joint bear heavy press, use pliers while working): Paste according to Dry- type Adhesion, fastening the two sides with pliers until the adhesive jollified (about 24hours), then remove the pliers.

3. The jointing position can be adjusted within 20mins after pasted, it will show best performance after 7 days.

Precautions：

Do not apply to structural assembly or damp substrate surface.

Safety Instruction：

1. Use in well ventilated areas.

2. In case of eye contact, flush with water and seek medical attention immediately.

3. Keep out of the reach of children.

Storage：

Should be stored separately in cool and dry places, temperature below 27℃.

12 months shelf life from the date of production.

Transport：

Transported as unhazardous products.