SF-66 ACRYLIC WATER PROOF SEALANT
详细说明

SF-66 ACRYLIC WATER PROOF SEALANT | ||
Specifications | Value | |
Composition | Acrylic Emulsion | |
Density | g/cm³ | 1.44 |
Solid Content | % | ≥50 |
Skin Formation time at 20°C / 50% RH | Minutes | 12 |
Skin Formation time at 25°C / 50% RH | Minutes | 10 |
Curing Rate | mm/24 hours | 1.6 |
Movement Capability | % | 10 |
Hardness (Shore A) ASTM C661 | 32 | |
Tensile Strength 100% elongation ASTM D412 | MPa | 1.3 |
Ultraviolet resistance | Yes | |
Can be painted over | Yes |
Using Instructions:
1. Keep the surface clean, dry and free from dust and grease.
2. Paste masking tape on the place that needs protection; Remove the masking tape before the acrylic sealant starts curing.
3. Product applicability should be confirmed in user's sole judgment. Please do the compatibility test before official use to make sure that it can stick well with the surface.
4. Remove excessive solidified sealant with sharp knife.
Notice:
1. Please do not expose sealant to the rain and dip in water before fully curried, cannot apply under 2°C or rainy weather surroundings. It will not stick fingers within 30-40mins above 25°C, fully curried takes 40-48 hours, however, depends on the thickness and humidity.
2. Do not apply to structural assembly or dampsubstrate surface.
Safety Instruction:
1. Use in well ventilated areas.
2. In case of eye contact, flush with water and seek medical attention immediately.
3. Keep out of the reach of children.
Storage:
Should be stored separately in cool and dry places, temperature below 27℃.
12 months shelf life from the date of production.
Transport:
Transported as unhazardous products.
Color:Beige or Customize
Packing:
Capacity: 280ml, 300ml, 600ml or Customize.
Packing Qty: 24PCS/CTN, 24PCS/CTN, 20PCS/CTN
Outer Packing Size:29X20X24CM, 29X20X24CM, 37X20X24CM
previous item: SF621 310 Caulk Gun
next item: SF-65 NAIL FREE ADHESIVE